Olympus DM 620 - Manual (Page 37)

2
37
EN
R
e
cording
Recording
Note
• If you are unable to produce a clear
recording with this recorder even after
adjusting the recording level (
☞ P.54),
this could potentially be because the
output level for the connected devices
is too high or too low. When external
devices are connected, perform a test
recording and then adjust the output
level for the external devices.
Recording the sound of other devices
with this recorder:
The sound can be recorded when
connecting to the audio output terminal
(earphone jack) of the other device and the
MIC jack of the recorder with the connecting
cord KA333 (optional) for dubbing.
Note
• When you adjust the various sound
quality settings related to playback on
the recorder, the audio output signal sent
out from the EAR jack will change as well
(
☞ P.60, P.62).
Recording the sound of this recorder
with other devices:
The sound of this recorder can be recorded
to other devices when connecting the audio
input terminal (microphone jack) of other
devices and the EAR jack of this recorder,
with the connecting cord KA333 (optional).
To MIC jack
To audio output
terminal of other
devices
To EAR jack
To audio input
terminal of other
devices