Onkyo DR-S2.2 - Manual (Page 13)

13
@ LATE NIGHT button [50]
Press to change the late night setting.
# ANGLE button [60]
Some DVDs are recorded with various camera angle playback
options. Press ANGLE repeatedly to display different camera
angles.
$ SUBTITLE button [61]
Press repeatedly to select one of the subtitle languages
programmed on a DVD or to turn the subtitles off.
% PROGRAM button [53, 56, 57, 58]
You can program titles, chapters, or tracks to play back in a desired
order. Programs can be a maximum of 24 steps.
^ CLEAR button [53, 54, 57]
Works in conjunction with a number of player functions. Use to
cancel repeat and random playback, and to edit programs.
& (When MODE DVD is selected)
Number buttons (1-9, +10, 0) [35, 52, 78]
Use to perform direct title/folder and chapter/track searches, and to
input numerical values.
SEARCH button [52]
Press to perform a title/folder, chapter/track or elapsed time search.
(When MODE AUDIO is selected)
SW MODE button [31]
Press to select the subwoofer mode.
TEST TONE button [33, 49]
Outputs a test tone for setting speaker levels.
IPM (Intelligent Power Management) button [22]
Activates the IPM function.
SP SETUP button [29, 30]
Press to select the optimum speaker configuration.
DISTANCE button [32]
For setting the distances for each speaker.
CH SEL button [33, 49]
Selects a speaker for changing the speaker output level.
T-D SETUP [47]
For setting the T-D parameters.
UP/DOWN 5/∞ [32, 33, 47, 49]
Press to adjust the value.
* STANDBY button [37]
Put the DVD Receiver in standby.
( LIGHT button
Illuminates the buttons. This button is useful when using the
remote controller in dark locations. When pressed, the buttons on
the remote controller light green.
) MENU button [35, 53]
Use to display or close the DVD menu or MP3 Navigator screen.
_ Cursor (2/3/5/∞/ENTER) [27, 34, 53, 64]
Use to move through the options on menu screens. Press to enter
settings.
+ VOL 5/∞ buttons [42]
For adjusting the volume.
¡ SETUP button [27, 64]
Press when the DVD Receiver is in either play or stop mode to
open and close the Setup screen.
™ MUTING button [42]
Activates the mute function.
£ T-D button [47]
Press to activate Theater-Dimensional mode.
¢ £ button [34, 37, 52]
Press to start or resume playback.
∞ 7 button [35, 37]
Press to stop playback. Pressing once enables playback to resume
from a point shortly before the location where it was stopped.
Pressing twice causes the disc to return to the beginning of the
disc when playback starts again.
§ DISPLAY button [62, 63]
Press to change the information being displayed.
¶ A.CTRL button [50]
Press to change the acoustic mode to boost the super bass/high
frequency sounds.
• AUDIO button [61]
Press repeatedly to select one of the audio languages programmed
on a DVD.
For Video CD, CD and MP3, each press changes the audio output
as follows.
→ Stereo → 1/L(Left) → 2/R(Right)
ª A-B button [54]
Press at the beginning and end of the section you want to repeat or
to mark a location you want to return to.
º RANDOM button [55]
Press to play chapters/tracks in random order.
– REPEAT button [54]
Use to set the repeat mode.
≠ ENTER button [81-83]
Press to program the commands of remote controller for other
devices into the remote controller.