Onkyo DR-S2.2 - Manual (Page 19)

19
REMOTE
CONTROL
OUT
2 ––VIDEO –– 1 VIDEO 2 VIDEO 1
IN IN IN IN OUT OUT
IN OUT IN IN IN
VIDEO2
CDR/PC
VIDEO 1 TAPE
MD/HD
TV/LINE
MON
OUT
MON
OUT
L
R
VIDEO
S VIDEO
AUDIO
SUB
WOOFER
PRE OUT
SURROUND
SPEAKERS
AUDIO
R L
FRONT SPEAKERS CENTER
SPEAKER R L
FM
75
ANTENNA DIGITAL
OUTPUT
DIGITAL INPUT
VIDEO 2 VIDEO 1
OPT OPT COAX
AM
Y P B P R
COMPONENT VIDEO OUTPUT
+ – + –
+ –
+ – + –
Connecting Speakers (Other models)
Before connecting
• Refer also to the instruction manuals of the speakers.
• This DVD Receiver is designed to reproduce optimum sound
quality when speakers with the impedances specified below are
connected. Please check the following information and choose
speakers with appropriate impedances for the connections.
Front speakers: 6 ohms min. per speaker
Center speaker: 6 ohms min.
Surround Speakers : 6 ohms min. per speaker
• Attach supplied speaker labels to
speaker cables to connect speakers
correctly.
• To prevent damage to circuits, never short-
circuit the positive (+) and negative (–)
speaker wires.
• Do not connect the speaker cable to the L
and R connectors at the same time and do
not connect more than one speaker to the
same speaker connectors.
10 mm
Active
subwoofer
Surround (L)
Connecting to SPEAKERS How to connect to the SURROUND SPEAKERS
and CENTER SPEAKER terminals
Press and hold
the lever. Insert the stripped
end of the cord.
By releasing the
lever, the lever is
replaced.
NO!
DO NOT connect the
power cord (mains lead)
at this time.
NO! NO!
R L R L
Strip 10 mm from
the end of each
cable, then twist
the exposed
wires tightly.
Front (R) Front (L) Center
Surround (R)
15 mm
How to connect to the FRONT SPEAKER terminals
Loosen the screw. Fully insert the end
of the cable.
Strip 15 mm from the end of each
cable, then twist the exposed wires
tightly.
Tighten the screw,