Onkyo DR-S2.2 - Manual (Page 57)

57
2/3/5/∞
ENTER
£
CLEAR PROGRAM
7
Exit Move
Current: Title
Title
Program Memory On
7
1
Chapter
(Chapter 1~18)
1
Program Chapter Program Title
Off
PROGRAM ENTER Select
A program with a maximum of 24 steps can be memorized.
Press PROGRAM.
The program screen appears. When a
Video CD or CD is loaded, the cursor
appears in the program window.
Exit Move Play
Current: Track
Total Time
1(/10)
0.00
Program Track
PROGRAM ENTER
Use the number buttons to enter the
numbers of the tracks in the order
you want to program them in.
• To program tracks 9, 7, and 18 in order,
press 9, 7, +10 and 8.
• To edit the program, refer to the
procedures on the previous page.
• To program a pause in a program, press
8 instead of a number button.
“
8” appears on the screen and the
pause can be programmed.
A pause cannot be programmed as the
first or last position in a program, and
two or more pauses cannot be
programmed in succession.
Press ENTER or £.
• Playback starts in the specified track
order.
• Press PROGRAM to return to the
previous display. The program play will
not begin until
£ is pressed.
• To stop the program play, press 7.
Notes
• To program a pause, or to add or delete a number, refer to the
procedures for “Programming DVDs” on page 56.
• You cannot program when playing a Video CD using menu
selections (during PBC).
Programming Video CDs, CDs
1
2
3
VCD CD
Number
buttons
Before operating the
remote controller
Press MODE DVD.
Notes
• When programming chapters, chapters not programmed may
appear on the screen. This is not a malfunction.
• Programming may not be possible with certain DVDs. On these
types of discs, the mark will appear on the screen when
programming is attempted.
• Only chapters within the same title can be programmed during
chapter programming.
■ To save a program in memory
This DVD Receiver can memorize the programs on up to 24 DVDs.
By turning the [Program Memory] to [On], the DVD Receiver will save
your program and recall it the next time you use the same DVD.
When the program memory exceeds 24, programs will be erased in
chronological order from the oldest program in memory.
1 Use the cursor button ( ∞) to highlight [Program Memory]
and use the cursor button ( 3) to select [On].
2 Press ENTER.
The program is saved in memory.
Note
When a DVD with a program stored in memory is loaded, program
playback may start automatically.
■ To erase a program saved in memory
The player erases programs in chronological order when the
maximum number of programs that can be held in memory is
exceeded. To prevent the player from erasing older programs that
you may still use regularly, or when you don’t want to use a program
anymore, it is possible to manually erase programs stored in
memory.
1 Load a DVD that has a program stored in memory.
2 Press PROGRAM.
The program screen appears.
3 Use the cursor button ( ∞) to highlight [Program Memory]
and use the cursor buttons ( 3/∞) to select [Off].
4 Press ENTER.
The program is cleared from memory.