Oki MC160n - Manual (Page 113)

113 Using the Copier
Making Advanced Copies
This section contains descriptions on setting 2in1 copying, ID card copying,
repeat copying, poster copying, duplex (double-sided) copying and collated
(Sort) copying.
"
ID card copying, repeat copying or poster copying cannot be set at the
same time that 2in1 copying, duplex (double-sided) copying or collated
(Sort) copying is set.
Setting 2in1 Copying
If 2in1 copying is set, two document pages can be copied together onto a single
page.
2in1 Copying From the ADF
1
In the main screen (Copy mode), press the up arrow or down arrow key to
select the current page layout setting, and then press the Enter key.
2
Press the up arrow or down arrow key to select 2in1, and then press the
Enter key.
The zoom ratio is automatically set according to the specified media size.
Change the zoom ratio if necessary.
The main screen (Copy mode) appears again.
"
In order to perform duplex (double-sided) copying or collated (Sort)
copying with 2in1 copying, specify the necessary settings before start-
ing the copy operation. For details, refer to “Setting Duplex (Dou-
ble-Sided) Copying” on page 118 and “Setting Collated (Sort)
Copying” on page 120.
"
Do not set 2in1 copying while the ADF is lifted open, otherwise a mal-
function will occur.
2in1 Copying From the Original Glass
1
In the main screen (Copy mode), press the up arrow or down arrow key to
select the current page layout setting, and then press the Enter key.
2
Press the up arrow or down arrow key to select 2in1, and then press the
Enter key.
The zoom ratio is automatically set according to the specified media size.
Change the zoom ratio if necessary.
3
Position the first page of the document on the original glass.