Oki MC160n - Manual (Page 244)

244 Troubleshooting
USB Dev. Not support A USB device
incompatible with
this machine is con-
nected. Disconnect the USB
device from this
machine.
USB Hub Not support A USB hub is con-
nected to this
machine. This machine is not
compatible with a USB
hub. When connecting
USB cables to this
machine, do not use a
USB hub.
USB MEMORY FULL There is no space
available on the
USB memory
device connected to
this machine. Delete data from the
USB memory device to
create free space, or
use a different USB
memory device.
Video I/F Error A video interface
error occurred in the
machine. Turn off the machine.
After a few seconds,
turn on the machine.
WRONG PASSWORD
xxx Server
The password is
incorrect, so the
indicated server
could not be
accessed. Check the password,
and then specify the
correct one.
Wrong Toner x An unapproved
toner cartridge is
installed. Install a correct Oki
toner cartridge.
xxx COVER OPEN
CLOSE xxx COVER
The indicated cover
is open. Close the indicated
cover.
The imaging car-
tridge is not
installed. Install the imaging car-
tridge.
A imaging cartridge
incompatible with
the machine is
installed. Replace the imaging
cartridge with a correct
one.
xxx IS DISABLED The TCP/IP, FTP,
SMTP or SMB set-
tings are disabled. Enable the TCP/IP,
FTP, SMTP or SMB
settings.
This message... means... Do this...