Oki MC160n - Manual (Page 238)

238 Troubleshooting
Error Messages
"
For details on fax error messages, refer to the Facsimile User’s Guide on
the CD.
SEARCHING The machine is searching
data.
SCANNING The machine is scanning
the document.
Warming Up The machine is warming up
or AIDC is being per-
formed.
This message... means... Do this...
ADDRESS IS TOO LONG The e-mail address
retrieved from the
LDAP server
exceeds 64 charac-
ters. This machine can han-
dle addresses contain-
ing no more than 64
bytes. Use a shorter
address.
CANNOT CONNECT
xxx Server
A connection with
the specified server
could not be estab-
lished. Check the settings
specified in the NET-
WORK SETTING and
E-MAIL SETTING
menus, and then try
sending the data
again.
CANNOT GET IP
xxx Server
The IP address of
the specified server
could not be
obtained from the
DNS server. Check the settings
specified in the NET-
WORK SETTING and
E-MAIL SETTING
menus, and then try
sending the data
again.
CHECK TRAY1 PAPER
LOAD PAPER ( 1 xx)
(PRESS START KEY)
Tray1 has run out of
paper. Load media into the
tray, and then press
the Start key.
Media has missfed
in Tray 1. Remove the missfed
media.
This message... means... Do this...