Oki MC160n - Manual (Page 70)

70 Control Panel and Configuration Menu
"
Manufacturer’s default settings appear in bold.
MEMORY RX
MODE Setting OFF / ON
Select whether to allow (ON) memory reception or
not (OFF). Select ON not to print when receiving con-
fidential faxes or when no one is around, for example,
at night. The received documents can be stored in
memory and printed at a specified time or when
memory reception is turned off (this function is set to
OFF).
A password can be set to specify the starting time or
ending time of memory reception, or to cancel the
function. The set starting time and ending time are
valid every day until memory reception is turned off.
No. of RINGS Setting 1 to 16 (Default: depends on PTT SET-
TING)
Enter the number of rings (between 1 and 16) until
the machine automatically begins receiving the fax
when an external telephone is connected.
"
If PTT SETTING in the USER SETTING
menu is set to NEW ZEALAND, this setting
range changes to 7 to 10.
REDUCTION RX Setting OFF / ON / CUT
Select whether documents longer than the current
paper size are printed reduced, split, or discarded.
OFF: The document is printed at full size and split
onto multiple pages.
ON: The document is printed at a reduced size.
CUT: The document is printed, but any part that does
not fit within the page is erased.
RX PRINT Setting MEMORY RX / PRINT RX
Select whether the fax is printed only after all docu-
ment pages have been received or printing begins as
soon as the first page of the document is received.
MEMORY RX: Printing begins after all pages have
been received.
PRINT RX: Printing begins after the first page has
been received.