Oki MC160n - Manual (Page 83)

83 Media Handling
Loading Media
How do I load media?
Take off the top and bottom sheets of a ream
of paper. Holding a stack of approximately
200 sheets at a time, fan the stack to prevent
static buildup before inserting it in a tray.
Note
Although this machine was designed for printing on a wide range of media
types, it is not intended to print exclusively on a single media type except
plain paper. Continuous printing on media other than plain paper (such as
labels or thick stock) may adversely affect print quality or reduce engine
life.
When refilling media, first remove any media remaining in the tray. Stack it with
the new media, even the edges, then reload it.
Do not mix media of different types and sizes, as this will cause media misfeeds.
Tray 1 (Multipurpose Tray)
For details on the types and sizes of media that can be printed from Tray 1, refer
to “Print Media” on page 77.
Loading Plain Paper
1
Remove the dust cover.