SUUNTO Vector HR - Manual (Page 31)

4
3.1 HoW To seT THe TIMe
To set the Time:
1. PRESS the [Select] button and hold in for 2 seconds. Located in Field 3, the seconds will begin to flash (Fig. 17).
. press the [+] button to scroll the seconds upward or press the [-] button to reset the seconds to zero.
3. at the seconds desired, press the [select] button to move to the next setting. located on right of field , the minutes will begin
to flash.
4. press the [+] button to scroll the minutes upward or press the [-] button to scroll the minutes downward.
5. at the minutes desired, press the [select] button to move to the next setting. located in the center of field , the hour will begin
to flash.
6. press the [+] button to scroll the hour upward or press the [-] button to scroll the hour downward.
7. at the hour desired, press the [select] button to move to the next setting. located in field , the 4 or  hour clock setting will
begin to flash.
8. press either the [+] or the [-] button to toggle between the 4hr and hr.
note: if the 12 hour clock is chosen either am/pm will appear below the hour in field 2.
9. at the clock setting desired, press the [select] button to move to the next setting. located in the center of field , the year will
begin to flash (Fig. 18).
0. press the [+] button to scroll the year upward or press the [-] button to scroll the year downward.
. at the year desired, press the [select] button to move to the next setting. located in the center of field 3, the month represented
by a number will begin to flash.
. press the [+] button to scroll the month upward or press the [-] button to scroll the month downward.
3. at the month desired, press the [select] button to move to the next setting. located to the right of field 3, the day will begin to
flash.
4. press the [+] button to scroll the day upward or press the [-] button to scroll the date downward.
note: once the user has determined the year, month and day, Wristop computer will supply the day of the week in field 1.
note: If the 12-hour clock is chosen, the date will be displayed as month/day. If the 24-hour clock is chosen, the date will be displayed
day/month.