SUUNTO Vector HR - Manual (Page 38)

3
4.3 24-HouR MeMoRy sub Mode
In the altimeter mode, press the [select] button twice to enter this sub mode.
In the 24-hour memory mode (Fig. 27):
• Field 1 displays the vertical ascent or descent rate;
• Field 2 displays the current altitude in increments of 5 meters or 10 feet, depending on the unit of measure selected ; and
• field 3 displays the particular hour and to the left the text “memory”.
• the outer circumference displays graphically the altitude in hundreds of meters or feet over a full thousand where one complete
circle is equivalent to 000.
To view the information compiled in the 24-hr memory:
. press the [-] button to scroll back down in increments of one hour and view the vertical ascent/descent rate and the altitude for
that particular hour.
. press the [+] button to scroll back up.
note: replacing the battery will not erase this information.
4.4 logbook sub Mode
In the altimeter mode, press the [select] button three times to enter this sub mode. In the logbook mode, nine summarizing displays
are shown. The displays automatically rotate showing the first display for 7 seconds then proceeds to show the next displays at 4
second intervals.
In the first display (Fig. 28):
• Field 1 displays the year;
• Field 2 displays the text “LO” with the current logbook number flashing; and
• field 3 displays the month and day of the particular logbook number. to the left of the month/day, is the text “log Book”.
the user can press the [-] to scroll down to view previous logs captured and then press [+] to scroll up to view the most current
logbook.
the second display shows the ascent information for the particular logbook that is being viewed (fig. 9).