Omega Speaker Systems High Speed Load Cell Interface Card LCIC-WIM-BEN - Manual (Page 41)

40
Variables Table (cont’d)
Category Variable Name Description Get Set
Weight_Native
Current weight after Filter2,
not rounded.
V
Weight_Rounded
Current weight after Filter2,
rounded to resolution.
V
A2D_F1 Current A/D after Filter1. V
A2D_F2 Current A/D after Filter2. V
Analog
Inputs
Temperature
The temperature measured on
the board (°C).
V
Output_1_Mode V V
Output_2_Mode V V
Output_3_Mode V V
Output_4_Mode
0 = Manual,
1 = General Setpoint.
V V
Output_1_Status V *
Output_2_Status V *
Output_3_Status V *
Output_4_Status
0 = off, 1 = on.
* The ‘Set’ is relevant only if
the corresponding
Output_ x _Mode is ‘Manual’. V *
Digital
Outputs
Output_A_Status
Status of all outputs at once:
#
4
#
3
#
2
#
1
#
x
= Status of output x:
0 = off, 1 = on (e.g., 0101).
V
Setpoint_1 V V
Setpoint_2 V V
Setpoint_3 V V General
Setpoints
Setpoint_4
The weight limit for output x.
Relevant only if the
corresponding Output_ x _Mode
is
‘General Setpoint’.
Irrelevant in Fill mode.
V V