Oracle Audio Technologies Sun StorageTek ATCA 4Gb FC Dual Port HBA SG-XPCIE2FC-ATCA-Z - Manual (Page 22)

16 Sun StorageTek ATCA 4Gb FC Dual Port HBA Installation Guide • April 2010
3. Use the cfgadm -c disconnect command to prepare the HBA for removal.
A flashing Power indicator LED indicates that the HBA is being prepared for
removal. A dark Power indicator LED indicates that the HBA is ready to be
removed.
▼ To Remove the HBA Hardware
1. After the HS LED stops blinking and stays blue, pull the module lever out the
rest of the way, and pull the HBA from the slot.
FIGURE 2-5 Removing the HBA