Quadra-Fire QV-PIER - Manual (Page 15)

15 Quadra-Fire • QV-PIER, QV-ST Series: HV-IPI • 2005-901 Rev. G • 2/06
Framing should be
constructed of 2 X 4
lumber or heavier.
Model A B C D E
QV-PIER-HV-IPI 42-1/8 42-1/2 23 35-3/4 48
QV-ST-HV-IPI 47-5/8 42-1/2 23 35-3/4 48
Figure 5. Framing Dimensions
NOTE: DIMENSIONS SHOWN IN INCHES
Shows center of 10” x 12” vent framing holes for top and rear venting. The center
of the hole is one inch (25.4mm) above the center of the horizontal vent pipe.
QV-PIER-HV-IPI QV-ST-HV-IPI
D
B
C
A
A
C
B
E