Quadra-Fire QV-PIER User Manual
Page 36
36
Quadra-Fire • QV-PIER, QV-ST Series: HV-IPI • 2005-901 Rev. G • 2/06
Turn on the electric ember lights and paint the glass to a
darkness as desired (see Figure 50).
Figure 50.
Make sure to paint the glass from both sides (see
Figure 51).
Figure 51.
The ember bed is now complete (see Figure 52).
Figure 52.
Placing the Ember Material
Ember material is shipped with this gas fireplace. The bag
labeled Glowing Ember (050-721) is standard glowing em-
ber material.
To place the ember material:
•
Remove the glass door from the unit.
•
Place dime size pieces of ember material about 1/2 inch
apart near port holes in burner top. Do NOT press em-
bers into burner ports. Cover the top of the burner with a
single layer of ember material.
•
Save the remaining ember materials for use during fire-
place servicing. The bag of embers provided is sufficient
for 3 to 5 applications.
•
Replace the glass door and a front trim door on the unit.
Figure 53. Placement of the Ember Material