Toshiba RD-XS32SB - Manual (Page 106)

42
Programming a recording (REC MENU) (Continued)
Recording
Notes
• The disc tray does not close automatically, even when the recording start time arrives. Set the recorder loaded an available
DVD-RAM/R/RW disc beforehand.
• It is not possible to record the same contents onto both the HDD and a DVD-RAM/RW/R disc simultaneously.
• When there is little time before a programmed recording starts, you may not be able to start another recording.
• Playback of the DVD drive pauses when a programmed recording onto the HDD starts.
• Confirm the “DVD compatible mode” (
page 162) setting. “Main” or “SAP” records main sound or sub-sound of multiplex
broadcasts respectively, and does not record the other. Therefore, select “Main” or “SAP” only when you record onto a DVD-
R/RW disc.
• When recording onto a DVD-R/RW disc, set “DVD compatible mode” ( page 162) to the desired recording sound for each
timer program.
Setting the details for every timer program
You can specify detail items for each of your timer
programme.
1) Press QUICK MENU at step 3 on page 40.
The Quick Menu is displayed.
2) Press / to select an item and press ENTER.
AV record quality
Select an item from registered selections (1-5) for
the picture and audio quality.
Edit title name
Enter a name for the timer program.
Use the input screen to enter a name (
page
30).
PDC on
Perform the programme PDC recording.
PDC (Programme Delivery Control System)
Programme PDC is a system of telling the recorder
when a programme actually starts. Typically, when
you want to record a programme you will tell the
recorder to start recording, probably, five minutes
before the advertized starting time of the
programme and to finish ten minutes or so after the
programme is due to finish. So even if the
programme starts early or finishes late you will
normally still get to see what you wanted to record.
However when live programmes over-run or the
day’s television schedule is changed from that
advertized, you may miss the desired programme
REC
MENU
Timer Programing 1/ 1
CH Date Exec
19:00 4/3 (Sa)
Audio Rate Mode Media End Start Disc
7 4.6 D/M1 DVD 4 4/10 (Sa) 00 8 00 SP
e.g.
DVD-R Broadcast Record
AV Record Quality
Genre setting
Quick Menu
AV record quality
Edit title name
DVD compatible mode
PDC on
Chap. mute
Exit
High rate save
Aspect ratio(Video mode)
which may have been delayed or even cancelled
and the recorder will record the programme even if
it is two or more hours late. With PDC, you enter the
exact start time and the recorder will wait until the
signal is sent to confirm the programme is starting
and the recorder will record the programme even if
it is two or more hours late.
PDC off
Perform the normal programmed recording.
DVD compatible mode
When recording onto a DVD-R/RW disc or
recording a content which will be copied to a
DVD-R/RW, make this selection (
page 162) for
each timer program.
“Off” setting is neglected and regarded as “Main” in
DVD-R/RW recording.
Aspect ratio(Video mode)
Select the aspect ratio when recording onto a
DVD-R/RW disc. (
page 162)
High rate save
Use this feature when you want to save space while
using the best picture quality rate for recording. This
will use 9.2 Mbps for recording and reduce the rate
temporarily for the portion where the high rate is not
required where picture is fairly constant.
Off : This feature is disabled and the normal
recording is performed.
On : This feature is enabled.
Notes
• When the audio quality is set to “L-PCM”, the picture
quality is set to “Manual 8.0 Mbps”. When the audio
quality is set to any other selection, the picture
quality is set to “Manual 9.2 Mbps”.
• While this is set to “On,” you cannot change the mode
or rate.
• The space used may not change, depending on the
picture contents.