Toshiba RD-XS32SB - Manual (Page 24)

16
Connecting to a TV equipped with phono type jacks
Connections
Note
• If your television set has one audio input, connect the left and right audio outputs of the recorder to a Y cable adapter (not
supplied) and then connect to your TV.
Select the connection type depending on the TV. (Normal TV/TV equipped with an S video input)
Normal TV
To audio
input To video
input
(yellow) To VIDEO OUT
(yellow) To ANALOG AUDIO OUTPUT
(R:red, L:white)
Video/Audio cable (supplied)
TV equipped with
an S video input
To audio
input To S video
input To S-VIDEO OUTPUT To ANALOG AUDIO OUT
(R:red, L:white)
S video cable (not supplied)
Audio cable (not supplied)
• The following setting is required according to the TV
that you are connecting. Perform this setting after step
4 (
page 15).
Setting “AV1 output” on the
“Initial settings” menu.
page 43
Normal TV No need to set.
TV equipped with an
S video input
No need to set.
“Audio out select” on the
“Picture/Audio settings”
menu.
page 48 TV
“Analog 2ch”
“Analog 2ch”