Toshiba RD-XS32SB - Manual (Page 147)

83
Editing
Function setup
Others
Introduction
Library
Recording
Playback
Cancel random (in Random play mode)
Resumes normal playback.
Notes
• Some discs may not permit random playback operation.
• You cannot use the random playback function in
conjunction with the memory playback function.
• You cannot use the random playback function in
conjunction with the repeat playback function.
• Pressing the STOP button during operation cancels
random playback.
To play in favorite order (Memory playback)
DVD-RW DVD-VIDEO VCD CD DVD-R
You can select 30 titles, chapters, or tracks and play
them in favorite order.
(To play contents in the HDD or a DVD-RAM disc in
favorite order, make a playlist. For details, see
“Editing” on
page 86.)
1) During playback or stop, press QUICK MENU.
2) Press / to select “Special playback mode”,
then press ENTER.
Special playback mode
The sub-menu appears. Select the next item by
pressing the / buttons and the ENTER button.
Memory list
If you select this and press the ENTER button, the
following display appears. Perform the steps below.
e.g.
1) Input numbers of titles, chapters, or tracks by
using the number buttons, in favorite order.
Input each 3-digit number.
To input a 1- or 2-digit number, first input 0.
(e.g. “0”, “0”, “3”.)
To cancel the numbers, press the CLEAR button.
To input a chapter number, press the / buttons
to shift the cursor.
2) Press / to select the next box, then perform
step 1).
To select another chapter in the same title, you do
not need to select the title number.
Repeat these steps if necessary.
You can program up to 30 selections into memory.
3) Press ENTER.
Memory playback starts.
Memory (in normal playback
mode)
To display an entry box for one program selection.
Memory release (in memory playback
mode)
To resume normal playback.
Memory repeat (in memory playback
mode)
To repeat a current memory playback.
Notes
• Some discs may not permit memory playback operation.
• Inputting numbers of titles, chapters or tracks that a disc
does not contain will result in error.
• You cannot program/change selections during memory
playback. To change selections, cancel memory playback
by pressing the STOP button.
• When you turn off the power, the selected memory is
erased.
• You can exit the memory playback display by pressing the
O button.
01 T CT 11 T CT 21 T CT
02 T CT 12 T CT 22 T CT
03 T CT 13 T CT 23 T CT
04 T CT 14 T CT 24 T CT
05 T CT 15 T CT 25 T CT
06 T CT 16 T CT 26 T CT
07 T CT 17 T CT 27 T CT
08 T CT 18 T CT 28 T CT
09 T CT 19 T CT 29 T CT
10 T CT 20 T CT 30 T CT