Toshiba RD-XS32SB User Manual

Page 30

Advertising
background image

22

Connecting to an audio system (Continued)

Connections

*

Connecting to an amplifier equipped with a Dolby Digital decoder

Dolby Digital
Dolby Digital is the surround sound technology used in theatres showing the latest films, and is now available to
reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs with this
dynamic realistic sound by connecting the recorder to a 6 channel amplifier equipped with a Dolby Digital decoder or
Dolby Digital processor. If you have a Dolby Surround Pro Logic decoder, you will obtain the full benefit of Pro Logic
from the same DVD films that provide full 5.1-channel Dolby Digital soundtracks, as well as from titles with the Dolby
Surround mark.

Manufactured under license from Dolby Laboratories. “Dolby”, and
the double-D symbol are trademarks of Dolby Laboratories.

• Use DVD video discs encoded via the Dolby Digital recording system.
• Make the following setting.

Connect either.

75

Ω coaxial cable (not supplied)

Optical digital cable (not supplied)

Amplifier equipped with a
Dolby Digital decoder

To OPTICAL
type digital
audio input

To COAXIAL
type digital
audio input

On-screen display

Select:

Page

“Audio out select”

Recording system

“Bitstream”

D

page 48

page 73,

“OPERATIONS”

Connecting to an amplifier equipped with Dolby Surround Pro Logic

Dolby Surround Pro Logic
You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an amplifier and speaker system
(right and left front speakers, a centre speaker, and one or two rear speakers).

With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in “Connecting to an amplifier equipped with a Dolby Digital
decoder”. Refer to that amplifier’s owner’s manual and set the amplifier so you can enjoy Dolby Surround Pro Logic
sound.

With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.

Amplifier equipped with
Dolby Surround Pro Logic

To audio input

Audio cable (not supplied)

To ANALOG (L/R)

Be sure to set “Audio out select” to “Analog 2ch”
when you enjoy sounds of Dolby Surround Pro Logic
using this connection.

*

Connect one or two rear speakers.
The output sound from the rear speakers will be monaural
even if you connect two rear speakers.

• Make the following setting.

On-screen display

Select:

Page

“Audio out select”

“Analog 2ch”

page 48

To DIGITAL BITSTREAM/PCM
AUDIO OUTPUT

Advertising