Toshiba RD-XS32SB - Manual (Page 26)

18
Connecting a satellite receiver
You can connect a satellite receiver to this recorder to enjoy watching or recording satellite programmes
through the recorder.
Connections
By using SCART cable
If both your TV and satellite receiver have a SCART input, use a SCART cable to connect the recorder.
To AV1(AUDIO/VIDEO)IN/OUT
VHF/UHF aerial
To AV2(SAT/DECODER)
IN/OUT
Satellite receiver
To SCART input
TV
To aerial
input
Notes
• To watch broadcast programmes by using the satellite receiver, use the INPUT SELECT button on the remote control and
select “AV2” (this is shown on the display on the recorder).
• According to the type of the TV set that you are connecting, set the output for the AV1 socket. ( page 43)
• According to the type of video output signal used for the satellite receiver that you are connecting, set “AV2 input” with “Initial
settings”. ( page 44)
SCART cable (not supplied)
SCART cable (not supplied)