Toshiba RD-XS32SB - Manual (Page 110)

46
Recording
VIDEO Plus+ Recording
You can program a recording simply by entering the corresponding PlusCode ® numbers.
Preparation
• Make sure that the recorder’s clock, receiving channels and their guide channels are set correctly ( page 28,
“INSTALLATION GUIDE”).
• When you record on a DVD-RAM/R/RW disc, load it into the recorder.
– Load a disc which has space available to record the programme.
– Make sure the loaded disc is not write-protected.
For satellite receiver users:
• Finish the set top box setting ( page 45, “INSTALLATION GUIDE”), and turn on the satellite receiver.
1
Open the lid of the remote control, and press
VIDEO Plus+.
The “REC MENU Timer Programing” with the PlusCode
input window appears.
2
Press the appropriate number buttons to enter
the PlusCode.
• Refer to newspapers or TV magazines to obtain
PlusCodes.
• To correct entered digits, press the CLEAR button to
erase them and press the number buttons to re-enter
again.
Note
• When you enter the number starting from 0, a 9-digit
number is entered.
3
Press ENTER.
The entered program is highlighted.
VIDEO Plus+
1 2 3
4 5 6
7 8 9
0
ENTER
TIMESLIP HDD DVD
EASY
NAVI
INSTANT SKIP INSTANT REPLAY
SETUP ENTER
T.SEARCH
CLEAR
3 1 2
REC MODE EXTEND TV CODE
4 5 6
DELETE
+ 10
7 8 9
0
PLAY STOP PAUSE
REC
LIBRARY
REC MENU EDIT MENU
CONTENT MENU
REC QUICK MENU
FR
AM
E/A
DJU
ST
PIC
TU
RE
SE
AR
C
H
SK
IP
S
LO
W
ENTER
VIDEO Plus+
Open the lid.
CLEAR
DVD-R DVD-RW HDD DVD-RAM
REC
MENU
Timer Programing 1/ 1
CH Date Exec
11 6.6 D/M2 HDD 3 4/10 (Sa) 30
-
- :
: :
:
:
50 MN
9 6.6 D/M2 DVD 10 4/13 (Tu) 30 00 MN
4.6 D/M1 HDD - - - - - - - - - - - - - - - - - SP
11
10
19:00 4/3 (Sa)
Audio Rate Mode Media End Start Disc
VIDEO PLUS+
PLUS CODE: – – – – – – – – –
e.g.