Toshiba RD-XS32SB - Manual (Page 226)

162
Aspect ratio(video mode)
DVD-RW DVD-R
To set the aspect ratio when recording onto a DVD-R/RW
disc.
4:3:
Fixes the aspect ratio at 4:3.
16:9:
Fixes the aspect ratio at 16:9.
Note
• When the bit rate on “AV record quality” is set to
“1.4(Mbps)”, pictures are recorded in 4:3 aspect ratio even
if “16:9” is selected.
DVD compatible mode
DVD-R DVD-RW HDD DVD-RAM
To set whether or not recording is to be performed in the
format for which recording is allowed by the DVD-Video
standard (video, audio and other data) during recording.
This selection is important for contents when recorded on
this recorder, if they will be copied to DVD-R/RW.
Off:
For recording of contents which will not be copied to
DVD-R/RW.
Both the left and right channel sounds are recorded.
When recording directly on a DVD-R/RW disc, this is
ineffective. The recorder will automatically regard this
as “On (Mode
I),” and record sound of the main
channel only in stereo. Select “On (Mode
I)” or “On
(Mode II)” for a DVD-R/RW recording.
On (Mode I):
Records sound of the left channel only in stereo.
On (Mode
II):
Records sound of the right channel only in stereo.
Notes
• When you select the manual rate of the picture quality
between 3.0 and 3.8 and set this mode to “On (Mode I)” or
“On (Mode II)”, the picture quality may become lower than
when you set this mode to “Off”.
• You can change the setting from the Quick Menu.
• It is no use to make this selection when dubbing. Select
when recording.
DVD-Video:CHP create
DVD-RW DVD-R
To set whether chapters are to be automatically created
at a selected interval during DVD-R/RW recording.
Off:
Chapters are not set.
5 min. : 10 min. : 15 min. : 20 min.
To set the interval at which chapters are automatically
created to 5, 10, 15 or 20 minutes.
Note
• The number of chapters has the upper limit, which varies
depending on the disc condition. If the number reaches it,
no more chapters are created.
Relay recording
HDD DVD-RAM
Turn on or off a function that makes a recording
automatically onto the HDD when the remaining space of
a DVD-RAM disc is Reduced to less than 10 minutes or
when a disc is not loaded.
Off:
Deactivates this function.
On:
Activates this function.
Notes
• The Relay recording does not function during the Rate
conversion dubbing or Line-U dubbing.
• Even if you set “Relay recording” to “Off”, A-B programmed
recording will be performed on the HDD.
• During playback of the HDD when you start Relay
recording and the “CONTENT MENU” is displayed,
playback stops.
• During Relay recording, HDD Title Playback is not
available.
• When the remaining space on the HDD is small, Relay
recording does not function.
• Time slip function ( page 63) is not possible while “On”
is selected.
Customizing the function settings (Continued)
Function Setup