Toshiba SL-5300 Series User Manual
Page 136
15. SET UP MODE
EO1-31009
15.5 PLU Data Maintenance
15-41
Procedure
Item Procedure
Changing the PLU data
1. Select a desired item key. (only one item)
2. The selected item appears on the Appointed data area.
3. Input the start PLU No.
4. Input the end PLU No.
5. Touch the Data code area or Data contents area to enter a number
of data.
NOTE: Data setting procedure differs depending on the data to be
changed. Refer to the following pages. See also Section 14.2 for the
max. values and notes.
6. Touch the [GO] key to change the data.
1) Auto Code (UPC Code)
(1) Touch the [AUTO CODE] key.
(2) When the Data contents area is touched, the Auto Code Setting screen will appear.
(3) Input a numeric data and touch the [Decision] key.
2) Mode Flag
(1) Touch the [MODE FLAG] key.
(2) When the Data contents area is touched, the Mode Flag Setting screen will appear.
(3) Touch the [Weigh], [Fix price], or [By count] key.
AUTO CODE key
Decision key
Data contents area
MODE FLAG key
Data contents area