Toshiba SL-5300 Series - Manual (Page 22)

8. LOADING/REPLACING THE MEDIA EO1-31009
8. LOADING/REPLACING THE MEDIA
8- 4
8. Remove enough labels from the leading edge of the label stock to leave 40 - 50 cm of backing
paper. Thread the backing paper through the printer as shown below, and fix the top edge of the
backing paper to the take-up shaft with the backing paper stopper. Then turn the take-up shaft
counterclockwise for a few times.
9. Push back the label cassette into the scale, and press the [FEED] button to check that the labels
are fed properly.