Toshiba SL-5300 Series - Manual (Page 31)

11. DAILY MAINTENANCE EO1-31009
11.2. Removing the Jammed Media
11- 3
11.2 Removing the Jammed Media
1. Turn off the power switch.
2. Pull out the label cassette.
3. Remove the jammed media.
4. Re-load the label roll correctly, and push the label cassette into the scale with the top edge of the
label protruding from the media outlet. (Refer to Section 8. Loading/Replacing the Media.)
CAUTION!
Do not push down or hit the print head block, as this may cause a machine failure.
Label Cassette
Print Head Block
Label Cassette