Toshiba SL-5300 Series User Manual
Page 178
16. REGISTRATION MODE
EO1-31009
16.3 By-Count Operation
16-32
3. Touching
the
[PRT/*] key causes a label to be issued.
NOTES:
1. The [PRT/*] key must be touched to issue the first label even the label issue method is set to AUTO.
2. To continue to issue the same label, touch the [PRT/*] key repeatedly.
3. When performing the strip issue in the Auto mode, the next label is automatically issued by removing the
printed label from the media outlet.
4. To change the quantity for the same PLU, touch the [CLEAR] key.
5. To call another PLU, touch the [CLEAR] key and [PLU] key. Then input the PLU No. and touch the
[PLU] key.
16.3.2 Changing the Quantity and the Unit Price Preset to the PLU
With the initial settings, this function cannot be used. To use this function, contact the nearest
TOSHIBA TEC service representative or sales agent.
No data is changed:
1. Call the PLU. (The quantity per price becomes 1.)
2. Touch
the
[PRT/*] key. A label is issued.
US model
CA model
US model
CA model
PRT/* key
PRT/* key