Toshiba SL-5300 Series User Manual
Page 25
9. OPERATION PANEL
EO1-31009
9.3 Layout of the Operation Panel
9- 3
(1)
Preset tare lamp:
Lights when a tare preset to the PLU is called. (See NOTE.)
(2)
Tare:
Max. 4-digit tare is displayed.
(3)
Weight:
Max. 5-digit weight including “
−
“ mark is displayed.
(4)
BACK key:
Used to return to the previous screen.
(5)
Commodity:
A commodity name is displayed.
(6)
Unit price:
Max. 4-digit unit price is displayed.
(7)
Total price:
Max. 5-digit total price is displayed.
(8)
Speed keys:
You can freely program these keys by SFKC setting.
(9)
Function keys:
You can freely program these keys by SFKC setting.
(10) Scale mode:
Current state of the scale is displayed (Weigh/By-count/Fix).
(11) Operating mode:
Current operating mode is displayed (REG. NORMAL (Label)/REG. MARK
DOWN/REG. REWRAP).
(12) Date and Time
(13) AUTO/MANUAL lamp:
The current label issue method is displayed.
(14) PREPACK (tare) lamp:
Lights when the called PLU data or tare is retained.
(15) NET lamp:
Lights when a tare is entered. In this case, a net weight will be displayed
on the Weight area.
(16) PREPACK (Unit Price) lamp:
Lights when the called PLU data is retained.
(17) ZERO lamp:
Lights when a tare is not set or nothing is placed on the platter (weight is
zero).
NOTE: With the initial settings, PLU preset tare function cannot be used. If you desire to use this function,
please contact the nearest TOSHIBA TEC service representative or sales agent.