Teac CD Receiver CR-H238i - Manual (Page 29)

ENGLISH
29
To change or add a track/file to the
program
1 In the stop mode, press the ENTER button
repeatedly until the program number for which
you want to change the track/file appears on the
display.
If you want to add a track /file to the end of the
program, press the ENTER button repeatedly until
“T_ _ _” appears on the display.
2 Select a track/file using the Number buttons, then
press the ENTER button.
> You can also select a track/file using the Skip buttons
(.//).
The previously programmed track/file is replaced with
the newly selected one. Or the track/file is added to
the end of the program.
To clear the program
In the stop mode, press the PROGRAM button.
< In the following cases, the programmed contents will
also be cleared:
pressing the AUX 1, AUX 2, TUNER, CD, USB, SD, iPod
or STANDBY/ON button
opening the disc tray
disconnecting the AC power cord