Preset tuning (1), If the reception is poor, Fm mode – Teac CD Receiver CR-H238i User Manual
Page 31: Preset automatically
Turn the MULTI JOG knob until the station you want to
listen to is found. On the remote control unit, press the
Scroll buttons (° / ‡).
The frequency changes by a fixed step.
Turn the MULTI JOG knob to start auto tuning.
When a station is found, the unit tunes in to the station
Repeat this step until the station you want to listen to
< If you want to stop the tuning process, press the Stop
Turn the MULTI JOG knob to select a preset channel.
On the remote control unit, press the Skip buttons
The selected preset channel is tuned in.
< For how to preset stations, see the next column.
If the reception is poor
Rotate or relocate the antenna to find the best position
You can select between Stereo and Mono by pressing
the FM MODE button when a stereo FM programme is
FM stereo broadcasts are received in stereo and
“Stereo” appears on the display.
< If the sound is distorted, the signal is not strong
enough for good stereo reception. In this case, change
to Mono mode.
To compensate for weak FM stereo reception, select
this mode. Reception will now be forced to monaural,
reducing unwanted noise.
Preset Tuning (1)
You can store up to 30 FM and 15 AM stations.
Select “TUNER FM” or “TUNER AM” by pressing
the TUNER button.
Press and hold the PROGRAM button for more
than 3 seconds.
The best received stations in your area will be stored