Test-Um VALIDATOR-NT NT955 - Manual (Page 26)

25
Test-Um NT955 Series
Validator-NT Remote Unit
The Remote unit has a battery charge indicator light that is on solid
during rapid charge, blinks slowly while topping off, or is off when
charging is completed. The 76-100% light will be on to indicate a fully
charged battery. The remote unit displays the percentage of charge
remaining in 25% increments. If no lights are on while powered by an AC
adapter, the battery is not inserted.
If the battery is replaced by another while topping off, it is necessary
to press the Battery State button to initiate a new charge cycle. When
operating from battery, a state of charge light is on whenever the remote
is auto-powered on by the Validator-NT or the Battery State button is
pressed.
Although the display capability is limited on the remote, you can view the
detailed charging information on the remote battery by inserting it in the
main unit.
Validator TM Battery and Power Management Validator TM Battery and Power Management