Test-Um VALIDATOR-NT NT955 - Manual (Page 6)

5
Test-Um NT955 Series
Introduction
The Validator-NT (NT955) Certifier uses Speed and Performance
criteria to test and certify Ethernet network cables against IEEE802.3
specifications up to 1 Gigabit. It also tests critical noise and delay
(Skew) measurements to assure that the respective cable runs will
perform to their maximum capability. Breakthrough technology has made
Speed and Performance Certification possible. It is the most up to
date way of seeing the physical condition of the wiring and how a specific
cable run will handle data flow on Ethernet speeds, 10 Megabit, 100
Megabit and Gigabit.
In addition to its state of the art 21 st Century cable certification
technology, Validator-NT boasts a full selection of active network features
designed to report cable performance and verify connectivity to network
devices. These features include the ability to negotiate with network
components and discover both the speed and configuration of connected
equipment.
Validator TM Introduction Validator TM Introduction