Test-Um VALIDATOR-NT NT955 - Manual (Page 81)

80
Test-Um NT955 Series
For manual IP addresses, uncheck the DHCP mode box by pressing
the up and down arrow keys to highlight the DHCP box and press
Select to deselect DHCP mode. Use the arrow keys to highlight the My
IP, Gateway Router (GWRTR) and Domain Name Server. Edit these
fields as necessary using the keypad, Backspace (F1) and Delete (F2)
soft keys. Press Accept to confirm your current selection and move to
the next field. The Netmask is entered next to My IP as a count of ones
starting from the left (FFF0 = 24, FFE0 = 24, etc.). Press the down arrow
to Select the box titled Configure IP Parameters and initiate the operation
to verify that the MY IP address entered is not in use already.
IP Address
Untitled1.job 2005 Aug 25
10:53:01
DNS
For manual IP address, uncheck DHCP. Netmask is count of 1 bits
GW/RTR
My IP
DHCP
192.168.1.200 / 24
Configure
IP Parameters
Test-Um Inc.
validator
DELETE TARGETS BACKSPC
My IP: 192.168.1.000
Netmask (CIDR): 000.000.000.0 (24)
Gateway/Router (GW/RTR): None
Domain Name Server (DNS): None
100%
Figure 6.9 Manual Mode IP Addresses
Validator TM Network Tests