Test-Um VALIDATOR-NT NT955 - Manual (Page 50)

49
Test-Um NT955 Series
3.4. Using Template Files
Each time you create a New Job, select a previously created template
with Contractor Information and/or Custom Cable Definitions to avoid
reentering information. (Figure 3.6)
1. From the Start screen, select Auto Test.
2. Using the arrow key, navigate to Job Utilities and press
Select.
3. On the Job utilities screen, select New.
4. Enter a name for your job in the Filename box using the
alphanumeric keypad. Press Accept. You must create a
Filename. If you do not create a new Filename a Warning
Message appears advising that the “Filename is empty.”
Press OK to go back and create a Filename for the job.
5. Press Select to display the existing template files.
6. Select a template that has been previously created or select
Default for a blank template.
7. Press OK (F3) when finished. Your new job that has been
created will be your current job.
Filename:
Template File:
New File
Untitled1.job
Default.tut
DELETE OK BACKSPC
Test-Um Inc.
validator 100%
2005 Aug 25
10:53:01
Example
Default.tut
Template01.tut
Template02.tut
Figure 3.6 Selecting a Template File
Validator TM Managing Job Files Validator TM Managing Job Files