2–quick start guide – Tascam BB-1000CD User Manual
Page 21
![background image](/manuals/213990/21/background.png)
TASCAM BB-1000CD
21
3.
Press the
REC/READY [
º
]
key to start recording.
The
REC/READY [
º
]
key lights during recording.
4. Recording stops when pressing the
STOP
key during
recording or recording-on-standby. The
REC/READY
[
º
]
key goes off.
• Pressing the
REC/READY [
º
]
key during recording
returns the unit on standby for recording. The
REC/
READY
key flashes during recording-on-standby.
Recording on a new track starts as you press the
REC/READY [
º
]
key again. The
REC/READY [
º
]
key
lights steadily.
NOTE
You can play the last recorded fi le if you press the PLAY/READY
[
¥/π] key directly after stopping recording by pressing the STOP
key.
Recording on a disc
Before recording, load a CD-R or CD-RW into the unit and
press the
CD
key to change the recording media to CD.
CAUTION
You cannot record on a disc when using the unit with battery
power. Supply the power through the AC adapter.
1.
Press the
REC/READY [
º
]
key.
The unit becomes on standby for recording. The
Record screen appears and
REC/READY [
º
]
key
flashes.
2–Quick start guide
2.
Check the level meter and adjust the input level by
turning the
FRONT MIC/EXT MIC
knob and the
REAR
MIC/LINE
knob.
The input level is indicated on the
L/R
meter.
The indicators upper left of the knobs light when the
input is too loud. Set the input level a little less than
that makes the indicators lit at inputting maximum
volume.
3.
Press the
REC/READY [
º
]
key to start recording.
The
REC/READY [
º
]
key lights during recording.
4. Recording stops when pressing the
STOP
key during
recording or recording-on-standby. The
REC/READY
[
º
]
key goes off.
• Pressing the
REC/READY [
º
]
key during recording
returns the unit on standby for recording. The
REC/
READY
key flashes during recording-on-standby.
Recording on a new track starts as you press the
REC/READY [
º
]
key again. The
REC/READY [
º
]
key
lights steadily.
NOTE
You can play the last recorded track if you press the PLAY/READY
[
¥/π] key directly after stopping recording by pressing the STOP
key.
CAUTION
To playback a disc recorded on the unit on another device, you need
to fi nalize it.