Turning the power on and off, Setting the date and time, 4–preparation – Tascam BB-1000CD User Manual
Page 29: 29 turning the power on and off
TASCAM BB-1000CD
29
Turning the power on and off
Turning of the power
Slide the
POWER
switch on the left side of the unit to
ON
.
The Home screen will be displayed after the start-up screen
disappears.
Turning off the power
Slide the
POWER
switch to
OFF
.
CAUTION
Do not turn off the power while a media indicator (CD or SD) are
fl ashing (during writing data).
Setting the date and time
Set the date and time of the built-in clock. The time infor-
mation of the files made by this unit is based on the clock.
1.
Press the
MENU
key to open the
MENU
screen.
2.
Use the
CURSOR
[
§
/
¶
] key to select
SETUP
and
press the
ENTER
key.
The
SETUP
screen appears.
3.
Use the
CURSOR
[
§
/
¶
] key to select
DATE/TIME
and
press the
ENTER
key.
The
DATE/TIME
screen appears.
The clock stops while this screen is displayed.
Precautions concerning batteries
Small children may mistakenly swallow a lithium coin
•
battery and it is very dangerous. Keep the battery and
the remote control out of the reach of small children. In
the event a battery is swallowed, immediately consult a
physician.
Install batteries with matching the polarity correctly.
•
Do not charge the battery.
•
Do not heat or disassemble batteries. Do not put them in
•
fire or water.
Do not carry or store batteries together with small metal
•
objects. The batteries could short, causing leak, rupture
or other trouble.
Precautions using the remote control unit
Remove the batteries if you do not plan to use the
•
remote control for a long time (longer than a month).
If the battery fluid leaks, wipe away any fluid on the
•
battery case before inserting a new battery.
Using the remote control unit while other equipment
•
controllable with infrared ray is turned on may cause
misfunction of the equipment.
Aim the remote control unit at the remote sensor.
•
An obstacle may interfere operations through the remote
control unit.
STOP
Ô
RECORD
PLAY/READY
˚
ª
Â
º
¥/π
¯
Operating distance
Head-on to the sensor: 7 m
15° left/right from the sensor: 4 m
4–Preparation
Remote sensor