Tascam BB-1000CD - Manual (Page 28)

28
TASCAM BB-1000CD
Powering the unit
You can use the supplied AC adapter or separately pur-
chased AA batteries as the power source. Connect the AC
adapter or install the batteries before use.
CAUTION
You cannot record on a disc when using the unit with battery
power. Supply the power through the AC adapter.
Connecting the AC adapter
Connect the power cable to the AC adapter, the adapter to
the unit, then connect the power cable to the AC outlet.
The left side panel of the unit has a dent for holding the
cable of the AC adapter–the AC cord holder. Hook the
cord in to the clipping of the holder to prevent unexpected
disconnection of the cord.
CAUTION
DO NOT hook the AC cord in forcedly. It may damage the cord. •
Uninstall the batteries when using the supplied AC adapter to •
keep the battery life longer.
Installing the batteries
Take off the battery case cover and install separately pur-
chased eight AA batteries observing the
± and — marks on
the case.
NOTE
Batteries are not supplied with this product. It is recommended to
use Ni-MH or alkaline batteries.
Remote control unit
Installing the battery
1. Pull out the battery holder.
2. Install a lithium coin battery (CR2025) facing the +
side up.
3. Put in the battery holder.
Battery replacement
Replace the battery when the operatable range decreases or
the unit becomes unoperatable through the remote control
unit.
Use a lithium coin battery (CR2025) for replacement.
4–Preparation
TASCAM PS-1225L
DC plug
AC cord holder
AC outlet