What you can do with the unit – Tascam BB-1000CD User Manual
Page 8
8
TASCAM BB-1000CD
Recording with the built-in microphones
To record sounds all around the unit by using the front and rear microphones
You can record sounds around the unit by using the built-in microphones on the front and rear. It is suitable when recording
the music played in a circle, placing the unit at the center of the circle. Select
FRNT/REAR
at
SOURCE
in the
INPUT
screen to
record sound using the front and rear microphones.
It is useful when...
recording sound of a small orchestra surrounding the unit.
•
recording sound of a band in a sound room placing the unit at its center.
•
recording a meeting.
•
«
page 38 “Selecting the input”
To record sound using the front microphones only
It is suitable when recording a small band or solo play. Select
FRNT/REAR
at
SOURCE
in the
INPUT
screen and turn the
REAR MIC
knob down to the minimum to record by the front microphones only.
It is useful when...
sound source exists in front of the unit only, such as in a private lesson or solo play.
•
recording sound of a big orchestra at a position such as the conductor's.
•
«
page 38 “Selecting the input”
Recording with external microphones
When using external microphones, connect them to the
EXT MIC
jacks on the left side and select
EXT/REAR
at
SOURCE
in
the
INPUT
screen. Turn the
REAR MIC
knob down to the minimum. Slide the
PHANTOM
switch to
ON
when using condenser
microphones in addition.
It is useful when...
recording in high quality with using high-performance condenser microphones.
•
«
page 35 “Connecting to the EXT MIC jacks”
page 38 “Selecting the input”
Recording the sound from an external device
To record the sound of a tape recorder or record player
You can record the playback sound of an external device such as a tape recorder or record player. Connect a device to the
LINE IN
jack on the left side and select
FRNT/LINE
at
SOURCE
in the
INPUT
screen. Turn the
FRONT MIC
knob down to the
minimum.
You can give numbers to tracks automatically by using the auto recording function (page 44).
It is useful when...
copying sound on a cassette tape or MD on to a CD or SD card.
•
recording sound on media unplayable on this unit.
•
recording sound through the line output of an electric instrument.
•
«
page 35 “Connecting to the LINE IN jack”
page 38 “Selecting the input”
What you can do with the unit