Tascam BB-1000CD - Manual (Page 36)

36
TASCAM BB-1000CD
7–Playback
Playable file format
This unit can play back audio CDs and MP3 files (32 - 320
kbps, 44.1 kHz) and WAV files (44.1 kHz, 16 bit) on an SD
card.
Playback
When the Home screen is displayed, use the PLAY/READY
[ ¥/π ] , μ and ≤ keys to operate the BB-1000CD as you
would with an ordinary CD player or other audio device.
Use the
DATA
wheel to change the playback position.
NOTE
When the Home screen is not displayed, these keys and the DATA
wheel have diff erent functions.
Changing the recording/playback media
Press the CD key to change the recording/playback media
to CD.
Press the
SD key to change the recording/playback media
to SD card.
The indicator of the selected source lights.
NOTE
Stop playback before changing the media. You cannot change •
the media during playback, recording, and pause.
The unit plays only fi les in a folder which contains the currently •
playing fi le when you are using an SD card. To play a fi le in
another folder, select the folder on the BROWSE screen (
∑ page
48 “Browsing an SD card").
Play a track
When playback is stopped, press the PLAY/READY [ ¥/π ]
key to start playback.
Pause playback
During playback, press the PLAY/READY [ ¥/π ] key to
pause it at the current position.
Stop playback
Press the STOP key to stop playback. The track returns to
its beginning.
Selecting tracks
Use the μ and ≤ keys to select tracks both during play-
ing and when playback is stopped.
During playback or when a track is stopped in the middle,
press the
μ
key to return to the beginning of the current
track.
Pressing the
μ key within the 1 seconds from the begin-
ning of a track skips to the beginning of the previous track.
When stopped at the beginning of a track, press the μ key
to skip to the beginning of the previous track, or press the
≤ key to skip to the beginning of the next track.
NOTE
The · icon appears on the display when playback is stopped at
the beginning a track, and the π icon appears when playback is
stopped in the middle of a track (paused).
Search forward and backward
Press and hold the
μ
key to search backwards or the
≤
key to search forwards.
Using the DATA wheel to change the playback position
You can use the
DATA
wheel to adjust the playback position
within a track. When you turn the wheel, the position in the
playback position display bar changes, so you can visually
confirm that the playback position has been moved.
NOTE
Playback continues normally while the DATA wheel is moving when
you move it during playback. The playback skips to the position the
wheel assigned as it stops.
Skipping a track a little backward (FLASH BACK)
Press the FLASH BACK key to skip a few seconds back the
track during playback (or pause). You can adjust the skip
back time from 1 to 5 seconds by changing the
FLASH
BACK setting on the SET UP screen ( ∑ page 50 “Adjusting
the time of FLASH BACK").
Playback from marked points
You can give markers to a track and play it from them.
1. Press the
MARK
key at a position you want to mark
during playback (or pause).
The current position is marked.
2. Press the F1 key to go back to the previous marker.
Press it repeatedly to go back further.
Press the F2 key to go to the next marker.
The markers are named “A, B, C,...” from the older. •
You can use up to 26 markers from A to Z.
“
• ” is indicated on the playback position display bar to
show the position of a marker. The name of the previous