Tascam BB-1000CD - Manual (Page 34)

34
TASCAM BB-1000CD
Operation example
See an operation example below: changing “
FLASH BACK
time” on the SETUP menu.
1. When the Home screen is displayed, press the MENU
key to open the MENU screen.
NOTE
When the ¶ icon appears in the lower right part of the screen, as
shown in the preceding image, there is additional information for
the current screen below what is shown on the display.
When the § icon appears, there is additional information for the
current screen above what is shown on the display.
2. Press the CURSOR [ § / ¶ ] key to select SET UP (high-
lighted in inverse), and press the ENTER key to open
the SETUP screen.
5–Screen Overview
Setting screen list
Screen Overview Access method
PART CANCEL Decreasing the sound of vocal and guitar.
MENU key MENU screen
REC SETTING Adjusting recording settings such as auto-recording and file format.
MENU
key
MENU
screen
SET UP Adjusting environmental settings
MENU key MENU screen
DATE/TIME Adjusting the built-in clock
MENU
key
MENU
screen SET UP screen
EDIT Editing files: dividing, moving, and deleting
MENU key MENU screen
COPY Copying files between a disc and an SD card
MENU key MENU screen
MEDIA Finalizing and unfinalizing a disc, deleting tracks, browsing files on an
SD card, formatting an SD card
MENU key MENU screen
BROWSE Browsing audio files and folders, playing/deleting files, making/select-
ing a folder
MENU key MENU
screen
MEDIA
screen
INPUT Selecting an input and adjusting the input settings
INPUT key
BALANCE Adjusting left and right balance of input signals and setting the volume
of the playback signal
BALANCE
key
METRONOME Set and operate metronome functions
METRONOME key
TUNER Access tuner and oscillator functions TUNER key
3. Use the
CURSOR
[ § / ¶ ] key to select
FLASH BACK
and show the current setting value (the factory
setting is “
2sec
”) highlighted in inverse.
4. Turn the DATA wheel to select the desired setting. The
setting is changed immediately, so there is no need to
press the
ENTER key again to confirm it.
NOTE
When the § icon appears to the right of a setting value, you can
change that value by turning it to the right. When the ¶ icon
appears to the right of a setting value, you can change that value
by turning it to the left.