Topcom BUTLER 2562 - Manual (Page 13)

BUTLER 2562 13
ENGLISH
3.9 DISPLAY OF CALL DURATION
The call duration is displayed after 15 seconds, in minutes - seconds,: “00:20”
At the end of each call, the total call duration is displayed for 5 seconds.
3.10 MICROFOON MUTE
It is possible to mute the microphone during a conversation.
Press
during the conversation, the microphone is then deactivated, you can talk freely without being heard by the
calling party.
“Secrecy On” is displayed.
Press
again to return to normal mode.
3.11 PAUSE KEY
When dialling a number you can add a pause between two digits by pressing the redail/pause key for 3 s.
3.12 CALLER IDENTIFICATION
Caller identification is only available if you have subscribed to this service with your telephone operator.
When you receive an external call, the callers number will appear on the display as the telephone rings.
If the network sends it, or if the name of the caller is in the address book, the caller is identified by his or her name.
The caller identity is replaced by the call duration after 15 seconds in communication. It is still possible to display the
caller’s identity after this time by pressing OK-key repeatedly for the name and number.
/P
HL_B2562_scan.book Page 13 Monday, December 29, 2003 12:15 PM