Topcom BUTLER 2562 - Manual (Page 9)

BUTLER 2562 9
ENGLISH
2. TELEPHONE INSTALLATION
2.1 CONNECTIONS
2.2. RECHARGABLE BATTERIES
Before you use your Butler 2562 for the first time, you must first make sure that the batteries are charged for 6-8 hourse.
The telephone will not work optimally if not properly charged.
To change or insert a rechargeable battery:
1.
Slide the cover towards the bottom and then lift it up.
2. Insert the batteries respecting the (+ and -) polarity.
3. Replace the battery cover
Note: The maximum working time of the batteries is approx. 250h and the maximum talk time is 13 hours! In the
course of time the batteries will start to drain faster. The batteries must be replaced. You can buy new batteries
from any DIY outlet (2 rechargeable batteries, type AAA NiMH)!
bottom view
of base
Power cable
Telephone cord
HL_B2562_scan.book Page 9 Monday, December 29, 2003 12:15 PM