Topcom BUTLER 2562 - Manual (Page 32)

32 BUTLER 2562
6.4.1. Inbox
The ‘Inbox’ contains a list of all messages that are received (ready and non-read). Each line contains the beginning of
the message. The first one is the latest received message. Before each new message appears an envelope
icon.
You can read the compleet message by selecting a message first using the up and down key. Pressing the OK
key will show the compleet message including: date/time when send + senders telephone number.
Press ‘c’ key to go back to the ‘Inbox’-menu. Or press OK will give you the following options:
-
Delete? To delete the current message. No confirmation needed.
- Forward Transfer the message in the Outbox and let this message ready to be send
- Reply To send a reply back to the sender of this message.
6.5. DELETING ALL MESSAGES
By selecting ‘Delete all’ in the main SMS menu, you can delete all messages in the ‘Inbox’ and ‘Outbox’.
1.
Enter the SMS-menu by pressing SMS-key
2. Select Delete All
3. Press OK to confirm or ‘c’-key to go back.
7. MANAGING MULTIPLE HANDSETS
7.1. SETTING UP AN ADDITIONAL HANDSET
You can subscribe new handsets on the base if these handsets support the DECT GAP protocol.
The base can support a maximum of 5 handsets. If you already have 5 handsets, and you wish to add another one or
change one handset, you must first delete a handset, then associate the new handset.
To register any handset, the base must be put into a special registration mode:
1.
Press and hold the paging key of the base for 6 seconds.
2. The base will then emit a beeptone. The base is now ready to register a new handset. You have 90 seconds after
pressing the button to register a new handset.
After putting the base into registration mode, start the procedure on the new handset:
HL_B2562_scan.book Page 32 Monday, December 29, 2003 12:15 PM