Topcom BUTLER 2562 - Manual (Page 28)

28 BUTLER 2562
6.2. SMS SETTING
- Send: Contains the SMS center sending telephone number. This number is needed to send SMS
messages towards the server.
- Receive: Contains the SMS center receiving telephone number.
When the SMS center sends you a new message, this telephone number is send together with
the message.
Remark: The SMS center numbers are depending from country to country and networkoperator. Please check
the extra sheet added in this manual for different countries ADDENDUM) or contact your local
networkoperator.
-
Melody: To turn on/off the melody sound each time when a new SMS is received.
- Terminal number: If more SMS devices are on the same telephone line, you can give each device another terminal
number (up till 9). So that SMS messages can be send to each device separately. This function
is networkoperator depending (Default = 1)
6.2.1. Setting up the SMS center numbers
See ADDENDUM for the correct SMS center numbers.
1.
Enter the SMS-menu by pressing SMS-key
2. Select ‘Setting’
3. Press OK
4. Select Send or Receive
5. Press OK
6. Delete the existing number by pressing the ‘c’-key and enter the new Message center numbers.
7. Press OK
6.2.2. New SMS message melody on/off
1.
Enter the SMS-menu by pressing the SMS-key
2. Select ‘Setting’
3. Press OK
4. Select MELODY
5. Select ON of OFF and press OK
Settings
>Send
Receive
Melody
Terminal nr.
HL_B2562_scan.book Page 28 Monday, December 29, 2003 12:15 PM