Topcom BUTLER 2562 - Manual (Page 24)

24 BUTLER 2562
Activate / Deactivate the priority ring
1.
Enter the menu by pressing /OK
2. Select Setup using the and keys
3. Press OK
4. Select RING priority using the and keys
5. Press OK
6. Select "ON" or "OFF" using the and keys
7. Press OK to validate
5.4 Using your telephone with a PABX
It is possible to use your telephone with a PABX or a local telephone network.
Use of your telephone with a recent system does not require any special adjustment. With certain older systems, it is
necessary to insert a pause between dialling a prefix and dialling the rest of the number. Your telephone can inserts this
pause automatically during the numeration.
In order to do this you must enter the prefix and the pause length.
It is possible to choose 2 prefixes for 2 different PABX.
To remove the pause, delete the prefix in memory in the same way as you entered it.
Setting the prefix
1. Enter the menu by pressing
/OK
2. Select Setup using the and keys
3. Press OK
4. Select PABX SETUP using the
and keys
5. Press OK
6. Select PBX1 or PBX2 using the
and keys
7. Press OK
8. Enter the PIN code (default = 0000)
9. Press OK to validate
10. Enter the PABX prefix
11. Press OK to validate
HL_B2562_scan.book Page 24 Monday, December 29, 2003 12:15 PM