Topcom BUTLER 2562 - Manual (Page 31)

BUTLER 2562 31
ENGLISH
5. After you pressed OK you will see the following display:
6. Enter the phone number where you want to send the SMS too. Or select:
• ‘Phonebook’ to search a number in the phonebook.
• ‘Edit Message’ to change/edit the message
• ‘Delete?’ to delete the message
6.3.2 Outbox
The ‘Outbox’ contains a list of all messages that are ready to be send. If you enter the ‘OUTBOX’ you will see the
beginning of each message. The first one is the first entered message.
You can read the complete message by selecting a message first using the up
and down key. Pressing the OK
key will show the complete message including date/time and the recipient telephone number. Press ‘c’ key to go back to
the ‘Outbox’-menu. Or press OK will give you the same options as in 6.3.1 point 5.
6.4. READING SMS MESSAGES
When you have received new messages, there are 3 ways to indicate this:
1.
By a short melody in the handset
2. A flashing envelope in the display: When ONE of the new messages is read, the envelope will stop flashing. The
envelope is displayed as long as there is non-read messages.
3. A flashing LED at the base.
Note that the flashing LED at the base also indicates that there are new calls received in the call list. As long as both are
not read, the LED keeps flashing.
When (a) new message(s) has been received and you want to read it, just press the SMS key. You will immediately enter
the ‘Inbox’ menu (not the main SMS menu).
>Send to?
_
Phonebook
Edit message
Delete?
HL_B2562_scan.book Page 31 Monday, December 29, 2003 12:15 PM