Teac MCDV600 - Manual (Page 23)

23
An on-screen menu is shown when a DVD or video CD with playback
control (PBC) content is loaded.
The way in which the menu works may differ according to disc.
DVD menus
Use the Cursor (5/b/t/g) buttons to select the menu item from
a DVD, and confirm the selection using the ENTER button.
Returning to the menu screen
Press either the MENU button or the TITLE button.
< Depending on the disc, pressing the MENU button during playback
may restart playback from the first chapter.
For about USB memory device compatibility, see page 8.
1
Press the FUNCTION button to select “USB Source”.
2
Plug your USB memory device into the USB connector.
It takes a few seconds for the unit to load the USB memory
device. The unit automatically starts playback.
< You can reverse steps
1 and 2 .
< Only USB flash memory can be used. Do NOT use a high-
capacity USB hard disc with this unit.
3
Press the Play/Pause (y/J) button to start playback if
playback has not started automatically.
Listening to an USB Memory Device
MP3 WMA JPEG DVD VCD MP3 WMA JPEG
On-screen Menu (1)