Teac MCDV600 - Manual (Page 40)

40
Preset Tuning
1
Connect a cassette tape deck etc. to AUX 1 IN jack of the
MC-DV600 using commercially-available RCA cables.
Or Connect the PHONES jack or audio output jack of a
portable audio player to the AUX 2 IN jack of the
MC-DV600.
< When you connect the portable audio player to AUX 2 IN jack
of the MC-DV600, use a commercially available stereo mini plug
cable.
2
Press the FUNCTION button to select “AUX1 Source” or
“AUX2 Source”.
< You can also select “AUX1 Source” or “AUX2 Source” by pressing
the AUX button on the remote control unit once or twice.
Listening to an External Source
You can store up to 20 FM stations.
1
Tune in to a station you want to listen to (see previous
page).
2
Press the PROGRAM button.
3
Select a preset channel to store the station using the
PRESET buttons, and then press the PROGRAM button
again.
The station is stored.
How to select preset stations
Select a preset channel using the PRESET buttons.