Teac MCDV600 - Manual (Page 38)

38
PASSWORD MODE
You can temporarily unlock discs for playback according to the level.
To change this setting, select ON or OFF, enter your password, and
press the ENTER button.
ON
You need a password to change the level of parental control.
OFF
You can change the level of parental control without a password.
You cannot temporarily unlock discs for playback.
PASSWORD
You can set a new password for parental control.
The default password is 2580.
1
Select “CHANGE” and press the ENTER button.
2
Enter 2580 (or your privacy password) using the Number
buttons.
3
Enter a new password.
4
Enter the same password again to confirm.
5
Press the ENTER button.
Note that you will need your password to change the level of
control in the future as well as to temporarily unlock discs for
playback.
If you forget your password, use 2580.
Settings (PASSWORD SETUP)
PARENTAL (Parental control)
Playback of some DVD discs can be limited depending on the age of
the users. The parental control system allows the playback limitation
level to be set by the parent. The default setting is “8”.
Notes:
< The lower the level, the stricter the limitation.
< If the rating of the loaded DVD disc is higher than the level you set,
the system will require a password. Enter your password and press
the ENTER button to start playback.
1
Select the desired parental control level from the menu,
then press the ENTER button.
1 KID SAF
Kids material; recommended especially for children and viewers of
all ages.
2 G
General Audience; recommended as acceptable for viewers of all
ages.
3 PG
Parental Guidance suggested.
4 PG 13
Material is unsuitable for children under age 13.
5-6 PGR, R
Parental Guidance - Restricted; recommended that parents restrict
children under 17 from viewing or allow to view only when
supervised by a parent or adult guardian.
7 NC-17
No children under age 17; not recommended viewing for children
under age 17.
8 Adult
Mature materials; should be viewed only by adults due to graphic
sexual material, violence or language.
2
You will be prompted to enter your password. Use the
Number buttons to enter 2580 (or your privacy password
if already established).
< No need to enter a password if “PASSWORD MODE” is set to OFF.
DEFAULT
All the items in the SETUP menu (except for the password and
parental control) will be reset to the default settings.
Settings (PREFERENCE) (2)