Teac MCDV600 - Manual (Page 31)

31
Programmed Playback (DVD, VCD, CD)
Up to 20 chapters/tracks can be programmed in the desired order.
1
If another source is selected, press the DVD button to
select “DISC Source”.
< You can also select “DISC Source” by using the FUNCTION button
on the main unit.
2
Press the PROGRAM button.
The programme list appears on the screen.
< To cancel the programme mode, press the PROGRAM button
again, or select “EXIT” using the Cursor buttons and press the
ENTER button.
3
Enter your desired “title and chapter number” or “track
number” using the Number buttons.
For example, to enter number 5, press “5”.
Repeat this step to programme more chapters/tracks.
< If you made a mistake, move the cursor on the track number and
overwrite it using the Number buttons.
< To programme more than 11 chapters/tracks, press the /
button to advance to the next programme page (or select
“/” using the Cursor buttons and press the ENTER button).
Press the . button to return to the previous page.
4
When the selec tion of chapter/track numbers is
completed, select “START” using the Cursor buttons and
press the ENTER button to start programmed playback.
< During programmed playback, the Number buttons do not
work.
< When programmed playback ends, the programme is cleared.
< If you press one of the following buttons, the programmed
contents will also be cleared.
OPEN/CLOSE (L), STANDBY/ON, Stop (H) twice,
FUNCTION (AUX, USB, FM)
DVD VCD CD