Toshiba D-R3 - Manual (Page 15)

14 - English
A Quick Overview presented in this guide will give you
enough imformation to start using the recorder.
C onnecting
& S etting Up
Quick Overview
Quick Overview ................................................14
Step 1 : Unpacking...........................................15
Step 2 : Connecting SCART Cable ................. 15
Step 3 : Other type of connecting the
Video output cable..............................17
Step 4 : Other type of connecting the
Audio output cable .............................18
Step 5 : Connecting to AV 3, AV 4, DV input jack .20
Step 6 : Preparing the Remote Control ..........21
This section involves various methods of
connecting the DVD player to other external
components and required initial setting modes. Step 1 : Unpacking
Step 2 : Connecting SCART Cable
Step 3 : Other type of connecting the Video output cable
Step 4 : Other type of connecting the Audio output cable
Step 5 : Connecting to AV 3, AV 4, DV input jack
Step 6 : Preparing the Remote Control
†
†
†
†
†
● Note to CATV system installer: This reminder is
provided to call CATV system installer’s attention to
Article 820-40 of the National Electrical Code (Section
54 of Canadian Electrical Code, Part I), that provides
guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building as
close to the point of cable entry as practical.
C
onnecting & Setting UP
00566A-D-R3_14~35 8/31/04 10:28 AM Page 14